Yongnuo YN-560-III Manual Flash For DSLR Cameras

×
Yongnuo YN-560-III Manual Flash For DSLR Cameras

Regular Price: AED 299.00

Special Price AED 199.00

Availability: In stock

Yongnuo [YN-560-III] Manual Flash For DSLR Cameras
In Stock

Regular Price: AED 299.00

Special Price AED 199.00

OR
Sold by

Delivery Delivery Within: 3 To 5 Days
Conditions New



Product Description

Yongnuo YN-560-III Manual Flash For DSLR Cameras

  • Brand Name : Yongnuo
  • Model No.: YN-560-III
  • Type : Flash
  • 2.4 GHz Receiver with 328' Range
  • Guide Number: 190' at ISO 100 and 105mm
  • Zoom Range: 24-105mm (18mm with Panel)
  • Output Range: 1/1 to 1/128
  • Tilts -7 to 90° & Rotates 270°
  • Optical Slave Functionality
  • Recycle Time: 3 Seconds
  • Multi Mode for Firing Series of Flashes
  • PC Sync Port
  • Runs on 4 AA Batteries
  • Dimensions (WxHxD) : 2.4 x 7.5 x 3.1" / 60.0 x 190.0 x 78.0 mm
  • Weight : 12.35 oz / 350 g

Full bounce and swivel lighting is possible due to -7 to 90° tilt and 270° of rotation with the locking flash head. The flash can also be triggered optically with either instant sync or skip pre-flash options for simpler off-camera firing. A built-in PC sync port further enhances the flash's connectivity and a Multi mode allows for stroboscopic lighting effects. The flash runs on 4 AA batteries and has a recycle time of about 3 seconds. It comes with a protective case and a stand.

Powering On/Off

The YN560-III has a soft push power button rather than a mechanical switch.  I must admit to preferring the latter, but once you get used to the button it just works. The down side is that you can’t just push and let go, the button needs to be held down for what seems like 2 or 3 seconds while the YN560-III cycles through various modes and icons flash across the screen.  Letting go of the power button early means the YN560-III just shuts down again! Turning off is similar, hold the button, wait for the icons to cycle before letting go and the speedlite to turn off before letting Go.

YN560-III Control Panel
 
 
Setting the Mode
 
The YN560-III includes two modes of operation, Manual and Multi. There is no TTL, ETTL or any other kind of automatic modes. This model is designed to be used in manual mode only, either on camera or with the aid of the dedicated YN560-TX transmitter, allowing up to 6 unique groups to be controlled individually.
 
YN560-III_Setting_the_mode_manual.jpg (300×212)
 
 

Setting the Multi Flash Frequency & Flash Count

When in MULTI mode the power is set in the same way as manual mode but now the centre OK button allows you to toggle between the Power, Flash Count and Flash Frequency settings. Once at the correct power setting press the OK button to move to the flash count which will start to flash, again use the left and right buttons to change the count up/down.
 
YN560-III_MultiMode.jpg (250×131)
 

Additional Information

SKU 112010
Brands Yongnuo
Camera Type Flash
Item Condition New
Delivery Time 3 To 5 Days
Reviews
0 Review(s)